将APE格式音频文件刻录CD

如何播放APE格式音频文件

APE是一种音频CD无损压缩格式，推荐用foobar2000、WINAMP（旧版本需要安装插件）、WMP（旧版本需要安装插件）播放。

从网上下载的几种常见的APE情况：

-A.由一个很大的 CDImage.ape 和 CDImage.cue 文件组成

-B.由若干个小的*.ape 和一个 *.cue 文件组成

-C.有若干个小的*.ape 而没有 CUE文件

-D.由若干个小的*.ape 和一个 *.fpl 文件组成

其中ape是压缩的音频文件；cue是镜像信息文件（同时也是菜单文件），里面记录的就是这张碟各音轨起始时间等信息; fpl只是菜单文件。

foobar可以直接导入cue文件，只要cue里的信息没错，就可以选曲播放了。

把APE文件刻录成CD的方法：APE->WAV->CD

1. 用foobar 2000（或者Mpney Audio)将APE文件转为WAV波形文件。

－在目标APE文件上右键，”转换”-”转换设置”，设置需要转换的wav格式，一般设置为WAV(PCM-定点16位)

－对于只有一个APE和一个CUE文件的CD，如果只想要转其中的几个曲子，可以打开CUE文件，选中你要转的点右键进行转换。

－将APE文件转转MP3或者其他格式的方法是一样的。

2. 修改cue文件

－用记事本打开APE音频的菜单信息CUE文件，把第三行中的”*.ape” 改成“*.wav”，注意“*.wav”文件名应与转换后的wav文件名相同，另外起名保存修改后的cue文件。

3. 用Nero（或EAC，Alcohol 120%）导入修改后的cue文件进行CD刻录

－必须从文件类型里选CUE类型以后才能够选，否则你看不到CUE文件。

－选择合适的低速度刻录。

说明：

－使用foobar 2000或Nero（需要插件）直接将APE文件刻录CD 可能对音质和CD寿命有影响，所以推荐APE->WAV->CD的方法。

－不要用Nero直接导入转换后的WAV文件，这样刻录的CD音质不好，而且不能选曲播放。

－如果没有cue文件，而下载的文件是每个音轨单独对应一个APE，将各个APE文件分别转换为wav后，一个一个文件分别导入Nero后刻录。

Access Gmail/Hotmail Account with Mozilla Thunderbird

Access a Gmail Account with Mozilla Thunderbird

Make sure POP access is turned on for your Gmail account.
Select Tools | Account Settings… from the menu.>>Click Add Account….>>Make sure Email account is selected.

Type your name under Your Name:.>>Enter your Gmail address under Email Address:.
Make sure POP is selected under Select the type of incoming server you are using..>>Type “pop.gmail.com” under Incoming Server:.
Enter your full email address (“john.john@gmail.com”, for example) under Incoming User Name:. (You’ll just have to append “@gmail.com” to what Mozilla Thunderbird has already entered for you.)
Give the Gmail account a name (something like “Gmail”, for example) under Account Name:.
Now click Done.
Highlight Server Settings under the new Gmail account.
Make sure SSL is selected under Use secure connection.
Highlight Outgoing Server (SMTP) in the list of account on the left。>>Click Add….>>Type “smtp.gmail.com” under Server Name:.>>Type “587″ under Port:.>> Type your Gmail address under User Name:.>> Select TLS under Use secure connection:.

Access a Hotmail Account with Mozilla Thunderbird

Setup
I’ll assume you have installed the WebMail extension and at least one of the optional components, if you haven’t please do so.

The first step is to check the WebMail extension is running. Go to the WebMail options, on the server panel the status of the three servers is displayed. The status for the enabled server(s) should be “Running”. If the WebMail extension fails to start this could be due to the operating system blocking ports below 1024, try setting the port to value higher than 1024 and restart Thunderbird.

Check you have installed the necessary domain handlers. Go to WebMail options, on the domains panel is a list of supported domains.

POP Account Creation
From the main menu select File->New->Account.

In the Account wizard select “Email Account”

On the Identity page set your name and email address.

Enter the following server information.

Server Type : POP

Incoming Server : localhost

The user name MUST include the domain

Follow the new account wizard to the end

If you changed the port number during the WebMail setup stage you must change the port number for this account in “Account Settings” (tools menu).

SMTP Account Creation
Open “Account settings”, select the “Outgoing server” option from the tree and press the “Add Account” button.

Use the following server details.

Server Name : localhost

User Name : username@domain